Bite is the front end of the print, also known as the mouth, is the position of the printing machine when holding the paper, and we generally print things, see the size of the printing, we will start to make up, and when making up, there is usually a problem of the bite position of the paper. Now, let's take you to understand the bite position of the printing paper.
Bite refers to the position where the paper is clamped by the paper feeding device of the printing machine when the printing machine is conveying the paper. This is the part that cannot be colored by the printing ink, and there can be no picture content when designing the layout or making up. Whether it is split, 4 or 8, there is a bite on one side when conveying paper.
Bite refers to the side that is first transferred into the machine in the process of printing, which is also the part that the printing plate cannot touch. Generally, it is controlled between 7mm and 15mm, so the non printing area of the undercut should be deducted when calculating the actual printing area.
Self copying is a process in which one half of a sheet is printed on the front side and the other half on the back side. The front and back sides are printed on the same plate once each to form two subordinate prints. In printing, you can save printer and PS plate. According to the layout form, it can be divided into up and down self flipping and left and right self flipping. Make up should pay attention to the left and right version to leave a bite, and the upper and lower version to leave two bite.
In a word, as the position where the paper is clamped by the paper feeding device of the printing machine when the printing machine is conveying the paper, the ink cannot be printed in the printing machine, so the bite part needs to be deducted from the actual printing area.濟南印刷廠講解的內容 更多的內容 請咨詢公司官網http://www.mosstuckerlaw.com/